TC Encore Pro Hunter or Contender Trigger JobPainstakingly Performed by an Experienced, Skilled EABCO/TC Gunsmith
Most people think of a Trigger Job in terms of reducing the trigger pull WEIGHT... Which is only part of it. The rest of the job involves minimizing the movement and enhancing the consistency. Because accuracy requires a gun to be standing still and locked on target all the way thru the shot. Excess trigger movement before and after the shot can pull your aim ever so slightly off the target. So, we shorten the pre-travel (take-up) in the sear and install an overtravel screw to take out the post travel. The result is that you get a trigger that barely moves when you press it to shoot. Consistency is also important... The sear engagement surfaces on an Encore Pro Hunter have marks from the molding/manufacturing process. Unless we polish these marks out, the sear will seat a little differently every-time you cock the hammer. An EABCO Gunsmith trigger is therefore lighter, shorter, faster, and more consistent than the factory trigger... Even with a good spring kit.
Please fill out work order form at the bottom of the web page and send with your action. Feel Free to Call 800-950-9088 M-F for shipping info.
**We do NOT need your barrel, buttstock, forend or hinge pin when you send in your action for this service. Thank you.