Timney Triggers for Weatherby Vanguard Rifles Black

great trigger ! easy install on my Howa 1500

It’s a Timney trigger... better than factory. It took EAB a month to deliver an in stock trigger.

Excellent service and easy to install.

I really don’t care how much or how little a fire arm costs, if it doesn’t have a good trigger pull it is junk. I am 84 years old and have known this since I was eight years old. It is amazing how long it has taken folks to catch on and I believe Timney triggers are helping to enjoy shooting as it should be. Thanks and God you and yours,

ALMOST ALL MY RIFLES HAVE TIMNEY TRIGGERS, AND THEY ARE GREAT. THEY ADJUST SO YOU CAN GET ANY WEIGHT PULL YOU WANT WITHIN THE RANGE OF THE TRIGGER YOU GET. ONE YOU SET IT UP, THAT WHERE IT STAYS, GOOD AND CONSISTANT TRIGGER PULL, JUST THE WAY YOU WANT.

Great triggers for the late model HOWA/Series 2 Vanguard rifles. The HOWA HACT triggers are quite good, but no comparison with the Timney. I've installed 3 so far, all were a drop-in fit with no modes necessary to the stock or the safety mechanism. Taking the rifle out of the stock and re-assembly took almost as long as the trigger install. The Timney gave me a perfectly clean break that I can set as low as 1.5lbs (you can go lower, but they advise against it), and a much more ergonomic and substantial feeling safety lever. All three positions of the Timney safety seem to work on my rifles.

This is my third Timney trigger. I bought this on for my Vanguard S2 Deluxe, it was a extremely easy installation. I did have dremel off a small amount of the stock to allow the safety go to the full fire position. It was easy to adjust the trigger pull using a trigger gauge and the break is clean and crisp. Nothing beats a Timney.

Timney is the best trigger you will find for the money. On the Vanguard Weatherby's there really isn't an option in terms of getting a good trigger pull with the factory trigger. Use Timney and you won't be sorry.

I bought the Timney trigger for a walnut stocked Vanguard. I had some issues making it fit. The trigger weight adjustment screw is longer than factory screw so I had to remove wood from stock to get action back in. Then I could not pull the trigger. I discovered that part of the safety mechanism was hitting the stock so I had to file a slot in stock for clearance. Shooting was great, no creep. Love the trigger.