All the hardware needed to attach our EABCO laminated 20ga and 12ga shotgun forend to your TC Encore or Pro Hunter Shotgun barrel. This hardware includes the two special TC Factory screws and washers. To keep the cost of our laminated hardwood forends for shotgunners as low as possible, we sell the shotgun forend hardware separately. But you may already have the hardware from your original factory shotgun forend. If this is the case you must be sure they are the same length screws. You then will not need to purchase this. Please note: if you are planning to use your current 20ga or 12ga factory forend screws please make sure that the two screws are the same length. If you have one long and one short you will need to purchase this hardware (which has two long screws of the same length which is .920" long).