Shaw Barrel fits Savage 10/110 and Axis, 30-06, 1:10, Blue, VC

High quality barrel. I am still fire-lapping the barrel, I have shot it 100 and 200 Yds. and shooting MOA but I am sure the rifle is sub-MOA once I take my time a bit more and use some better ammo (no-doubt the rifle shoots better than I do). Presently using pulled-match-bullets with non=match brass and primers, charge weight. Two problems I ran into were: could not head-space because I used my old barrel nut and I had to bore out about 1/8 inch, as the threads were all the way to front end of the nut ( I notice the EAB nut is bored out (relieved)), as I understand it the newer Savage nuts may be relieved in front). Once I relieved the barrel-nut headspace was not a problem. And first time at the range I did not have enough adjustment in my scope (windage) to zero, don't know (and don't care) if it was barrel or mount holes or the receiver itself, most likely a combination of all three (sometimes the errors cancel and sometime they multiply). At any rate I got some BURRIS Signature rings with offset inserts and problem solved, for the record BURRIS has a pretty good video about the Signature offset inserts.

As a Backorder, I ordered on Jan 25 and received March 11. For a first timer, installation took a hour going very slow and methodical. The wrench is solid and cut well. Installed the barrel chamber/ ie shoulder is a little tighter than my factory barrel. The lands are about 20” longer. So that a 3.25 OAL gets bumped back to 3.23 OAL. They’ll layover soon enough so Im not worried at all, (Im more curious after 100rds.) but just reminding otherS to always measure before going hot. The bluing has a good sheen to it. The savage factory blueing looks coarse and flat when compared. Im happy with it and the bluing difference is nothing to me, but picky people should get the action blued to match. My final decisions will be at the range. But so far, it looks Eabco picked up another lifer. See you at the range. Morgen

Easy install and a straight shooter. 1/2 MOA off bypod at 100 yrds but im sure someone with better eyes could do better.

Easy install and a straight shooter. 1/2 MOA off bypod at 100 yrds but im sure someone with better eyes could do better.

Worked GREAT! Hardest thing was getting the factory barrel off. Awesome grouping!

This is my second barrel from eabco and these people are awesome. Had my barrel ready in 3 weeks including custom threading and they even called me to let me know it was done and ready to ship. As always the bluing is beautiful and is an absolute straight shooter, will always order all my savage barrels from them.. keep up the awesome work and outstanding customer support. 5 stars+++

I received my barrel kit quickly despite ordering around Christmas/New years. It was packaged well and the machine work and blueing was on par with what my professional smith turns out. I cleaned it and lapped with the bore paste before screwing it on. It fit exactly as it should on my Axis action. Shot 1 and lapped with bore paste again. Next I mounted my scope and gave it a rough bore sight. I then proceeded to put three shots all touching at 75 yards with oil and dry patches between shots. After completing break in, I proceeded to print groups ranging from 1/4 to 3/4 MOA out to 400 yards. This was with cheap factory ammo, it shoots even better at distance with my hand loads.

I installed the barrel without a hitch. The fit and finish are excellent. I won't have an opportunity to test fire until July. More to post later.

I have purchased this barrel in .223 and another in 6.5 Creedmoor, both group a 5 shot group under a dime at 100 yards off sand bags. If you shoot from a sled it is conceivable you will have one ragged bug hole with reloads. Very impressive accuracy for the value and I can not see a reason to buy barrels any where else. Plan on doing a 7mm-08 this spring when the barrels come in.

Great shooting barrel and quick shipping. Highly recommended

I looked at this barrel for a long time and I finally took the plunge. I replaced the factory barrel that came on my Savage Axis with this Varmint. World of difference! Consistently shooting sub-moa groups and no need to worry about the heat anymore. It does add quite a lot of weight but it is worth it. The fact you get everything you need to swap the barrel in one kit, is un-beatable. One thing I did is buy a new barrel nut as well, made installation super easy.

This was a great deal for an awesome upgrade. The 24 varmint contour barrel is beautiful, and this kit came with barrel wrench, go no-go gauges, and cleaning products. I mounted to a Savage Axis with no problems. Don't hesitate to buy this kit!!

very good barrel, sub moa with the test loads while breaking it in. Easily installed, fit perfectly, and an extra hundred bucks worth of installation accessories for free in the package.

Great barrel, especially for the price. Installed it on my 308 savage axis and it now shoots under 1/2 MOA, very happy with this barrel and wouls strongly recommend it!

I've shot several of my friend's rifles built with these barrels..... They shot so great, i had to have one of my own. The package arrived quickly and the barrel was easy to install with the supplied kit. My first trip to the range, i was not surprised. .... this barrel performed to my expectations. Can't wait to put some more rounds down range and plan on building more rifles with ER Shaw barrels!

excellent package and extremely accurate barrel would rate six stars if i could.. highly recommended product.

I love this barrel. Easy install. The head space gauges were perfect and it really does the job. Would highly recommend to anyone who wants a full contour barrwl