Shaw Barrel fits Savage 10/110 and Axis, 223 Rem, 1:14, Blue, VC

For the E.R.Shaw .223 1/14 twist VC blue. I've been waiting for these to come back in stock and when they did I ordered mine. Two days to get here and about 2 hours to install after making the barrel vice. Another hour to remove some barrel channel material on my Axis and it's ready. I borescoped the barrel first and I was impressed. One shot, clean x 5. Next three gave me .106" center to center from 50 yards. Clean again. Next two shots did the same thing. I'm using bore tech C4 to clean and can't see any blue/green. I tried copper removers and still no copper. After each cleaning I use two drops of Lucas gun oil followed by one dry patch. My load is liberal amounts of IMR 3031 in a full length sized LC brass picked up from after AR-15 boys at the range. Fired off by a dirt cheap S&B primer spitting out a 40gr Nosler tipped boat tail. Hardly match grade ammo. The barrel finish and overall quality is much nicer than I expected especially for the price paid. Tomorrow I'll go easy on the coffee and shoot some at the 100 yard bench. Had I known it was going to shoot this good I would have used bags instead of the cheap Amazon bipod and tried harder. All in all I 100% pleased with the Shaw 223 VC in blue.

Easy install and a straight shooter. 1/2 MOA off bypod at 100 yrds but im sure someone with better eyes could do better.

Easy install and a straight shooter. 1/2 MOA off bypod at 100 yrds but im sure someone with better eyes could do better.

Worked GREAT! Hardest thing was getting the factory barrel off. Awesome grouping!

Would love to no why it's not available in 6.5 creed???????

This is my second barrel from eabco and these people are awesome. Had my barrel ready in 3 weeks including custom threading and they even called me to let me know it was done and ready to ship. As always the bluing is beautiful and is an absolute straight shooter, will always order all my savage barrels from them.. keep up the awesome work and outstanding customer support. 5 stars+++

I received my barrel kit quickly despite ordering around Christmas/New years. It was packaged well and the machine work and blueing was on par with what my professional smith turns out. I cleaned it and lapped with the bore paste before screwing it on. It fit exactly as it should on my Axis action. Shot 1 and lapped with bore paste again. Next I mounted my scope and gave it a rough bore sight. I then proceeded to put three shots all touching at 75 yards with oil and dry patches between shots. After completing break in, I proceeded to print groups ranging from 1/4 to 3/4 MOA out to 400 yards. This was with cheap factory ammo, it shoots even better at distance with my hand loads.

I installed the barrel without a hitch. The fit and finish are excellent. I won't have an opportunity to test fire until July. More to post later.

I have purchased this barrel in .223 and another in 6.5 Creedmoor, both group a 5 shot group under a dime at 100 yards off sand bags. If you shoot from a sled it is conceivable you will have one ragged bug hole with reloads. Very impressive accuracy for the value and I can not see a reason to buy barrels any where else. Plan on doing a 7mm-08 this spring when the barrels come in.

Great shooting barrel and quick shipping. Highly recommended

I looked at this barrel for a long time and I finally took the plunge. I replaced the factory barrel that came on my Savage Axis with this Varmint. World of difference! Consistently shooting sub-moa groups and no need to worry about the heat anymore. It does add quite a lot of weight but it is worth it. The fact you get everything you need to swap the barrel in one kit, is un-beatable. One thing I did is buy a new barrel nut as well, made installation super easy.

This was a great deal for an awesome upgrade. The 24 varmint contour barrel is beautiful, and this kit came with barrel wrench, go no-go gauges, and cleaning products. I mounted to a Savage Axis with no problems. Don't hesitate to buy this kit!!

If you are on the fence about buying one of these barrels go ahead and jump. I just put one on my savage 111 and what a shooter it is now. Shot a 4 shot group @100yds that can be covered by a nickel.

very good barrel, sub moa with the test loads while breaking it in. Easily installed, fit perfectly, and an extra hundred bucks worth of installation accessories for free in the package.

Great barrel, especially for the price. Installed it on my 308 savage axis and it now shoots under 1/2 MOA, very happy with this barrel and wouls strongly recommend it!

I've shot several of my friend's rifles built with these barrels..... They shot so great, i had to have one of my own. The package arrived quickly and the barrel was easy to install with the supplied kit. My first trip to the range, i was not surprised. .... this barrel performed to my expectations. Can't wait to put some more rounds down range and plan on building more rifles with ER Shaw barrels!

excellent package and extremely accurate barrel would rate six stars if i could.. highly recommended product.

I love this barrel. Easy install. The head space gauges were perfect and it really does the job. Would highly recommend to anyone who wants a full contour barrwl

Shipping of barrel was quick and packed well. Very satisfied with my barrel.

I have purchased 3 Shaw barrels and consider them to be a good value. If you just want to change caliber these barrels are certainly an economical way to do that on Savage rifles. They deliver MOA or better accuracy and match Savage factory bluing. The only issue I have experienced is the threads are cut pretty high so be prepared to sand down the threads or run a die over them before they can be hand threaded into the receiver. The quality of the barrel combined with inclusion of the barrel wrench and bore paste make this a good value for the price. Excellent for general hunting and target shooting, but not a match or competition grade.