Ruger Mk III Bolt Racker Handle

Ruger Mk I, II, III Bolt Racker Handle

18 Review(s) Write a Review

Your Price: $31.00

Retail Price:$32.95

You Save:$1.95(6%)

Part Number: 006-MBR

Availability: IN STOCK

Choose TYPE *

Type1 Type2 Type3

Quantity

Description
Product Features
Customer Reviews

Bolt Racker Handle for Ruger Mk I, II, III, and 22/45
Study the Pictures to Match Your Bolt to the Correct "Type" Bolt Racker
The Bolt Racker Handle makes cocking and clearing the action SO EASY. Install it either left or right handed and we have "Types" to fit all Ruger Mk I, II, III, and 22/45 factory bolts.
Choose Your Type - Using the pictures above, compare the grip surfaces of your bolt...
- Type 1 bolt grip surfaces are parallel to the bolt (They "square" with the bolt).
- Type 2 bolt grip surfaces are at an angle to the bolt and they're 1-1/4" Wide (Large Dovetail).
- Type 3 bolt grip surfaces are also at an angle but, they're 1-1/16th" Wide (Small Dovertail).
Easy Installation - Slip it on and tighten the allen head screws.

Great Bolt Racker !!

Had hand reconstruction.. And have had problems with hold and pull movement.. I now have one on all my Ruger Mark pistols.. Best device ever.. Now when they make one for Glocks I'll be even more happy.. Be Well and Thanks Bob

Reviewed by: ROBERT C COURTNEY from KINGSTON on 3/19/2020

Ruger Mk II Bolt Racker Handle

The bolt racker handle works very well on my Ruger MK II. Since I have a scope on my handgun, it was previously difficult to properly grip the bolt for racking. This simple device eliminates the problem and makes racking much easier...even without the scope attached.

Reviewed by: Brent Chettle from St. George, Utah on 11/2/2019

None

Sorry about my views on the bolt racker handles but just don't like the handle sticking out the side. My guns are kept in cases and it doesn't work for me. Wish they could be more like a Halo ring.

Reviewed by: Douglas from Garden City Ks on 6/27/2018

great idea

I have installed the item but have not used it on the range yet it too cold here. Will write mare when I try it out.

Reviewed by: Anthony Bair from Commack New York on 2/21/2018

Works very well!

This little accessory is great. The fit is very tight (as it should be) but it takes all the pain out of racking the bolt. My new Mark IV bolt has very sharp serrations on the bolt that cut into my fingers. I deducted a star because it's longer than necessary making it look a bit bulky. It just barely fits in a large pistol rug. Functionally it deserves 5 stars but aesthetically it's a 3 at best. I might change over to the more elegant Tandemkross ring instead.

Reviewed by: brett henne from Baltimore, MD on 1/12/2018

Mr.

Love this item. I am 70 and this racker makes it earier the cock my MK II. I did find I needed to locltite the set screws it get a good solid fit. Worked like a charm!

Reviewed by: Paul from VA. on 11/18/2017

Shooter

Excellent add-on for my Mark 4 22/45. First installed it without loc-tite to check function. Worked flawlessly. Followed up that range session with re-installing with loc-tite and has been rock solid since. I prefer this racker over the ring as I am used to using a blade hand to rack the bolt just like on my AR. I would recommend this product highly.

Reviewed by: Jason from NW Indiana on 7/21/2017

handy item

I installed this racker on my MKII, quality build, easy to install and stay put. A quality product, great site!

Reviewed by: nick from drexel hill on 6/15/2017

None

Sturdy well made works good

Reviewed by: Scott from Massachusetts on 3/15/2017

Bolt racker handle a plus

Love the fit and finish. Great PLUS for loading the gun and helping if I get a jam. Looks great. Friends at range have asked where to get one.

Reviewed by: Steven from Phoenix on 1/12/2017

Mr.

I got the Type 1 racker handle for my Ruger Mark I. It is awesome! A little bigger than I thought but after a few hundred rounds in the range I can see why. As soon as I got it I put blue loctite just in case. My fingers have been happy.

Reviewed by: Rolando V. from San Diego on 9/6/2016

MR.

WORKS GREAT TIGHT FIT, COUPLE HUNDRED ROUNDS ALREADY STILL TIGHT. WOULD RECOMMEND TO ANYONE, MY WIFE REALLY LIKES IT MAKES EASIER FOR HER TO SHOOT

Reviewed by: LOUIS from OKLAHOMA on 9/5/2016

Bolt Racker

I am a stroke survivor lost most of the strength in my left hand, this product allows me to function the pistol with ease. It is a much better product than similar plastic products.

Reviewed by: Chris from Texas on 7/18/2016

Regular Guy

Set screws loosen unless put on pretty tight. Loc tite might be a good idea. Other than that it works good. Won't fit in plastic case with handle on.

Reviewed by: Jason Priest from Layton, Utah on 4/22/2016

Docjohn

Works great. I think it is the best alternative. Without something you chew your hand up. I am left handed and it can be oriented either way.

Reviewed by: John from Michigan on 3/27/2016

First Rate

Excellent solution for making the Mk III bolt manageable. Well made and easily installed, it's terrific. I use my Mk III Hunter for Steel Challenge and the racker will make a big difference on those very few times when it is absolutely needed because of chambering issues.

Reviewed by: MemphisJim1 from Suburban Memphis, TN on 12/25/2015

Mr.

Really like this item. Makes it much easier to properly seat the magazine. Have installed them on all my 22/45 magazines.

Reviewed by: Pete Costa from Wisconsin on 12/25/2015

Partner

This is absolutely the highest quality and most reasonably priced solution for a MKIII bolt. The MKIII bolt is a horrible design, and this is a very solid and simple solution. Very simple and fool proof installation. It does exactly what I need it to do on a Steel Challenge gun at less than half the price of most rackers. Great product and top notch customer service from EABCO.

Reviewed by: Michael Farniok from Illinois on 10/29/2015

Ruger Mk I, II, III Bolt Racker Handle

Choose Options

You May Also Like

Recently Viewed Items

Sign Up for hot deals & new product releases