Original Bob Sled AI-308 Single Shot Magazine fits Accuracy International, RPR, CDI, Badger Mag Wells

Great price from EABCO As with my other Bob sleds fit and function perfect

Works flawlessly. Also very well constructed. I highly recommend.

This mag provides a smooth chambering of single rounds per F class rules. Much better than fussing with the standard magazine.

Works great in my Ruger American Predator 6.5 Creedmoor with the Oryx Chassic.

The Bob Sled is very solid and functions in the magazine-well perfectly with its fit. For my use in a Remington 700, customized for Benchrest shooting, it is not functional. My neck tension is generally .015-.020 and the Bob Sled just doesn't have a good enough height and angle to chamber the round consistently without hangups. After numerous attempts to try and solve this, I went back to just placing the cartridge on top of the original magazine (which sits higher) and placing it as far forward as I can before closing the bolt. It takes a few seconds longer but I get no hangups and no unnecessary jamming on the round. If I were using a higher neck tension, or loading factory rounds, this product would work fine.

The single feed magazine works just as described. The reason I only gave it 4 stars is the cost. Although it worked perfectly I feel it is significantly over priced. Even with the discount I feel the price point is twice what the materials, manufacturing costs, and markup should be.

Fits my Ruger Precision rifle perfectly and functions great. Quality product.

I was a little hesitant to spend $40 on something so simple but am glad I did. The Bob Sled fits my Ruger Precision perfectly and works flawlessly loading a round. Very high quality and much more solid than I had imagined. I love that it was designed to last not only my lifetime but probably my kids too. Highly, highly recommend.

This is a fantastic product. I shot an 60 round 600 mid range match about two weeks ago and it preformed flawlessly in my RPR. Some of our shooters made theirs out of a wood block and I have used those but this far superior and at a very reasonable price

I received the Original Bob Sled 308. I wanted to let you guys know that it wasn't exactly a perfect fit with my Ruger Gunsite scout 308. The silver part that the mag release latches needed some force to lock in place. It appears that it might need a slight use of a file for it to work properly. Other than that, the product looks great and functions as designed.

Wanting to single-feed rounds in my control feed rifle, I bought and tested two different single feed sleds that just didn’t work and caused difficult bolt close to get the ejector over the cartridge rim. Then found this one, the eabco patented unit. Snaps right into the AICS mag well. Works like magic. Because I had talked to the rifle maker and the maker of the first sleds, I was well versed in the difficulty of single feed in an action not designed for that. (Push feeds, no problem). So I’m really impressed at how well this part works.

works great in my ruger precision rifle 308.

I’m very happy with the sledWorks and fits perfectly on my .308 RPRThank you very much for the detail and function of its fit within the magazine wellTaking my time being accurate and monitoring temperature is now much easier

Works perfectly. I shoot some bench rest matches with a Ruger RPR and have to single feed. The hassel of bolt hold open is long gone.

EXCELLENT product. Make for DOPING your Scope, one shot at a time. I use it when I test my reloads with the Choreographer. Makes for selection of multiple reloads a breeze....ONE at a time. Will purchase another one, when they design one for an AR .308 platform.

The Bob Sled is a superior quality product when compared to other products specifically the materials used. Work flawlessly on both of my RPR 308 and 6 Dasher convertion. The price and service from EABCO goes without saying.

Bought a 6.5 CM Ruger Precision rifle for long range competition. The requirement is to load one round at a time (no loaded mags permitted for safety reasons). The Ruger mag design doesn't allow for this and trying to insert one round at a time into the chamber takes more dexterity than I have. Searched on line for a device before modifying the Ruger mag and came across the Bob Sled, which fits perfectly (Ruger allows for many different mag designs), is made from a solid block of polymer and has a very slippery, so rounds align properly and chamber perfectly. Excellent product and highly recommend it, as well as the Ruger precision rifle.

This works flawlessly in my RPR, great product and a good price

I was loading on top of the follower fairly often (prone- PD shooting) and found this a big help. Also useful for load development testing. You can almost toss the round in the chamber, and close the bolt. My Bob S sled is a bit sticky, I could ease edges, but expect it will wear in.

The original Bob Sled AI-308 fits perfectly in my Savage Stealth 6.5 Creedmoor. The rounds slide into the chamber with virtually no resistance. Smooth as silk. And very fast shipping. I'll be a return customer.

Using this in a Ruger Precision Rifle for F-Class. This is a very well made, fit and finish excellent, runs like glass. Would highly recomend.

I like to single load my bolt action rifles and this is especially useful with the Ruger Precision Rifle and Magpul Pmags. With mist bolt action rifles, the round can be set on top if the empty inserted magazine and when the bolt is closed, the round is chambered. If using the Ruger Precision Rifle and the supplied Pmags, the bolt has a tab that will catch on the mag, bit allowing it to close unless the mag follower is depressed. This is difficult on the RPR due to the small ejection port. The Bob Sled works perfectly, allowing the round to be set on top of the solid sled and and chambered when the bolt is closed.

Love the bob sled, works very well in my ruger rifle

Works like a champ in my Ruger Precision Rifle for the 6.5 Creedmoor. I can now seat bullets off the lands to get the best accuracy possible.

This is an excellent product. It's solidly built and does exactly what it's supposed to do, permit the insertion of individual rounds in your chamber. Functions perfectly in my Ruger Precision Rifle.

Solid piece. Nicely crafted and works as advertised. I have yet to even remove mine from my RPR.

The Original Bobsled worked awesome in my Ruger Precision 6.5 Creedmore!

Before buying I read the reviews. It works perfectly in my Ruger Precision Rifle in 6.5 Creedmoor.

The device feeds perfectly, thank you

Works awesome in ruger precision rifle couldn't single Load with pmag,this is great And best price

I got this for my Ruger Precision Rifle. It fits great and works great.

This sled really works! Ok, do you need a single shot adapter, YES you do, if you are like me and spend a bunch of time developing new loads and feeding your bolt guns one round at a time. The action with the adapter treats your rounds with respect, no marks from the magazine lips, smooth transition into the barrel, etc. The adapter works in my Ruger Precision Rifle, Savage Stealth, and in two different XLR chassis (308, 243, 358 Hoosier). The adapter is solid and well built. It doesn't get in the way of the bolt and ejects when you hit the magazine release. OK you don't really need it to shot your rifle, but I find it handy.

Works, I use it in a Ruger Precision Rifle, 6.5 Creedmoor. Have also used the .223-5.56 in an AR. Good Stuff.

I purchased this sled for my ruger precision rifle. It fits like a dream, feeds ammo smoothly and now I can use participate in f-class competitions, since mags are not allowed. Very happy with product.

Bought this for my new Ruger Precision rifle in .308. Perfect fit. Easy insertion and removal. Couldn't be more pleased.

I bought this to use in my Ruger Precision Rifle. It saves a lot of time when shooting single shot and works perfectly.