M1 Carbine Replica Ruger 10/22 Stock and Tribute Version 2.0 - Includes TWO Handguards!

I found this kit to work perfectly. It fit together without any modifications and was a fun project for my extra little 10/22 rifle. I've had many friends wanting a closer look at it! I was missing one tiny screw for the front sight I purchased. I emailed you folks, you contacted the supplier and I had two replacement screws in two days. GREAT SERVICE! The two sets of hand guards seemed a bit wasteful, but I suppose there are those who would not want to purchase the "Carbine" sights and use the hand guard for the original 10'22 sights. The finish looks very nice, however I have not had it to the range yet. I suspect it will work fine but may be scratched in time, especially when my Grandkids shoot it. All in all it presents a nice looking package and definitely resembles a real M1 Carbine. I may further embellish the "look" with some kind of muzzle break?

Beautiful retro stock, fit like a glove, really changed the run -of-the mill look of my 10 / 22. Make sure to get the accessory canvas sling and oiler to complete the look. Very reasonable price in comparison to other after-market stocks.

the stock feels exactly as the original does. the only grip i had about it is i had to use my dremel to relieve a couple of areas because it didn't fit perfectly. it does now. overall very good

Easy build, looks great.

I purchased this stock kit along with the replica sights, sling, magazine extension and oiler so I'd have lookalike carbine to shoot rather than my actual M1 Carbine. The Ruger 10/22 barrelled action fit in the stock like a glove. Fit was very nice, can't say I like the finish all that much. It doesn't match the original M1's finish, maybe I'll refinish it at a later time. The sling and oiler looks good on the rifle too and the replica sights complete the looks. Don't forget to get the magazine extension. The mag extension fits very nice and looks great. It's very helpful in getting the Ruger 10 22 magazine's out easily. Wish I'd bought two or three more. Even though I'm not that impressed by the stock finish I'm giving this 5 stars because of the price per value. I'd buy the whole setup again.

I bought this stock with the intention of turning a stainless and synthetic stock 1022 into a m-1 carbine clone. I love the fit and feel of the stock. Feels very good in the hands. Easy to swap in. Only down side is the finish. Very cheap looking. I immediately stripped it and stained walnut and applied true oil.

This M1 carbine stock has just the right look to it seems to be correct in nearly every aspect. The Finish is even and the color not bad. The rifle with a factory Barrel fit precisely and was installed with not a single problem. My only complaints are these. When I removed the handguard screw to switch handguards I noticed the threads were badly stripped oh well not such a big deal. The other thing is there is a small nail or Brad protruding from the side of the stock just enough to bug me. Maybe sticking up .030 in. I found that the nail that retains the Threaded Screw anchor pierces through and messes up the thread on the screw I'm a little OCD about stuff like that. But overall the stock is a great value.

This product is very well done. I have the look and feel of the original M1.

The Fit was good ,Looks and feels great in hand,Although the finish could have been better it sctatches easily,Also the srcew that attaches the top handguard pretty much stripped out right away using very little torque.The barrel band seems to take care of holding the top handguard down but still a little loose where the screw is.It will probably have to be re-tapped.other than those issues I'm happy with it.

The stock fits the 10/22 perfectly, the sling and oiler complete the look. As noted in many earlier reviews, the finish is sprayed on and scratches easily- but should be easy enough to refinish if it comes to it. Overall, I like the stock and it fits well and points easily.

Looks pretty good, no fitting issues, well executed....Worth the price paid. My only knock on it is that it's made of some kind of a semi-gloss finished very plain grained hardwood instead of walnut. A stained/oil finish would have been better. I really liked the non-notched hand-guard that was included, it made it look a lot cleaner looking for Tec- Sight use. :)

The feel of this stock is worth the price. Gun fits great in the stock. Not real excited about the finish. I felt the finish was weak and cheaper looking. I immediately sanded and restained and then tru-oiled it multiple times. Wow! Did that ever make a difference! The stock looks and feels like a high dollar accessory now with just a little effort ! I would but this stock again in a heartbeat but would also redo the finish in a heartbeat. Redoing the stock really made the gun feel like a high dollar rifle instead of a normal ruger 22lr stock.

This stock is great. Makes the rifle handle and feel better. Along with the tech sights it is very accurate.

This is ny second stock. For casual shooting, I prefer the feel of this stock over the original and other aftermarket stocks.

I dropped the Ruger 10/22 into the M1 and tighten it up. On the Range I got a 1 group using the TS 200 sights which were easy to install also. The Sling and Oiler add to the look and feel of the Rifle.

My dad always wanted an M1 carbine. But he's cheap, and loves shooting 22's. I got him a 10/22 for Christmas and followed up with this for fathers day. He made a gun rack to place it over his desk. It's beautiful. Finish is almost too perfect for an M1 carbine. The originals were rougher looking. It is a great looking piece though. Very easy to install. Wish it came with authentic sights though.

Great kit with good fit and relatively easy to assemble even without instructions. Just don't be a doofus like me and overlook the screw in the top of the stock that allows you to slide the barrel/trigger assembly right in. No need to remove barrels, sights or anything like that, which I almost did. Just another noob adventure. With the sling/oiler kit, it makes a nice replica.

Nice tight fit easy install and wonderful look. Perfect for Apple seed or other Liberty rifle setups.

The overall look is great, it makes my 10-22 look like an M1 Carbine. The rifle fit nice an tight into the stock. My only negatives are the stain finish was rough on the top of the receive area, the front sling swivel could have been made with a larger gage of wire. The top cover should be made without a hole for the original rear sight. If someone wants to dress up their 10-22, they will be willing to remove the rear sight, and get the sight kit that finishes the carbine look. Overall, love the package.

Stock arrived on time and was a great fit. No modifications were needed excellent product.

An excellent reproduction. Makes my 10/22 even more fun to shoot.

LOVE THE STOCK,THE DUMMY MAGS & THE SIGHTS BUT THE TOP HAND GUARD DOES NOT LINE UP WITH THE BOTTOM PART I WILL GET IN TOUCH WITH EABCO TO LET THEM KNOW VERY SURE THEY WILL TAKE CARE OF THIS MINOR PROBLEM

This stock looks and feels great. Shoulders like a dream, and provides great sight alignment, especially when using a set of TechSights. EabCo has the best price around, too, even beating out Ebay.

I order this stock recently after seeing an article in a gun magazine about how to do this conversion. I installed the stock this past Monday July 3 and was very pleased. The stock was beautiful and it fit great, no issues at all Everything lined up perfectly. The rifle looks awesome now, really made a big difference. Thanks again!

I ordered this stock on a Monday and received it on Wednesday of the same week. Great service. I love how my receiver and barrel fit right in place. I also ordered the front and rear sight kit, and I love how the rear sight makes it look real. The stock scratches very easy. I stained it, but still scratches. I'm happy with the product. Thanks

Out of the many different type of kits available for the Ruger 10/22 I decided on the M1 Carbine kit. It is as beautiful and it appeared on your web site. Installation was as easy as it comes and with a few accessories, it looks like the real deal. I couldn't be happier.

Stock has been milled great, fits standard 10-22 with no issues. Stock looks great BUT, very susceptable to scratches. I placed on the stock the oiler and strap which has a buckle toward the end of the strap. It fell over on carpeted floor and the gun must have fell directly on the strap. It left a large scratched imprint of the buckle. No way it should be that easy to scratch. Wanted to give it 2 stars but will give it the 3.

Excellent product. Fit and finish are great along with a great looking rifle that looks like a carbine. Thank you.

A delight of perfection. World class product , fit and finish as advertised.At my Range the most sought after can I try it /hold it gun I ever owned .Nostalgia that works .Not just a pretty face .

Easily installed this stock; looks great side by side with my M1 Carbine.

very nice product...

fit well, made good, looks good, well satisfied

Good fit but very poor finish. EABCO was great to work with and accepted it as a return with no hassle.

Love the new stuff i got thanx guys ! My rifle looks awesome now (:

I bought this kit to do this M1 build with my daughter while tying in some history of WWII. I figured it would be a fun way to learn about it as well as the role of the M1 Carbine and in the end she'd have a rifle of her own. The Tribute stock looks awesome and cant wait to spend some father/daughter time putting it together with her.

I purchased the Ruger 10/22 M1 Carbine Tribute Stock, Tech Sights 200, Dummy Stick Magazine, and the Sling with oiler. I am very happy with the final results. I went to my club to sight in the rifle, and there was a shoot-n-see target left on our pistol range about 30 feet out, with a couple holes that were more than three inches from the center. I felt it was a good place to start. Using a sandbag rest, I fired a full magazine ten shots. The red bullseye is about ¾ of an inch. The entire shot group could be covered by a nickel and the group covered the top half of the red bullseye. Packed up and headed home, I will shoot at 50 and 100 yards on another day. Almost too good to be true !!

Good stuff. Completed my M1 replica. Got los of compliments on it.

I bought this as a gift for my old man and it reminded him of when he was a boy during the Vietnam war. He was very excited Christmas morning. Fit and finish are great! 10/22 slides right in. No problems extracting mag.

No problem changing from the factory stock to this one. I seem to be able to hold the rifle steadier with the replica.

Well made. Good Looks. Easy to install. Perfect fit. Arrived in just a couple of days. I replaced the stock on a brand new 10/22 with this and added the oiler and sling, plus the sights. My father who served in the Big Red 1 visited. When I handed him the rifle he smiled and said M1 Carbine. Where did you get this. I told him to look again. He said it was pretty amazing.

The stock was a snug fit for my 10/22 (10/22RB, #1103). The two sides surrounding the mag well was just a bit too tight, the mag wouldn't drop free, whether loaded or unloaded. I took my Dremel with grinding wheel and ground slightly on both sides, basically just took the paint off. That solved the problem. All my 10rd and 25rd mags now can drop free even unloaded. Some people commented on the Internet forums that the finish of this stock was not very durable. I can confirm that their comment was true. I've taken it to the range just once so far, shot about 200 rounds, and didn't handle it roughly at all, I already got a couple small nicks and dings on the stock. My original stock which is 5 years old, got about some number of nicks and scratches as this new one. Also I wish EAB would make a rubber buttpad for this stock, same style/thickness as the metal one, just made of rubber. Rubber buttpad will help the gun not slide down and fall to the ground, when I lean it against the wall on some slick floor like marble.

The M1 tribute items perfectly fitted my Ruger 10/22 rifle. Thanks for your help.

I have admired the look of the M1 Carbine for as long as I can remember. When I recently bought a Ruger 10/22 I found that I was not happy with the composite polymer stock, nor was I completely pleased with the fibre optic sights. When looking for a reasonably priced wooden stock I came across the M1 Carbine Tribute and was instantly intrigued. The EAB offering was the best looking and most complete package of the lot, so I ordered it. The resulting Replica Carbine is all that I had hoped it would be. It pretty faithfully re-creates the look and feel of the original genuine article and feels great in the hands. I'm extremely glad that I saw the images and even gladder that I bought the stock and replaced the Ruger original. I'd do it again under the same or similar circumstances.