EABCO Accuracy Barrel fits Savage 10/110 and Axis, 223 Rem Wylde, 1:7, Blue

Savage Accuracy Barrel® 223 Rem Wylde 1:7

• 26" length, approx 3lbs
• Varmint weight tapered to just under .800" diameter at muzzle
• 223 Rem Wylde uses the 223 Remington Bolt Face
  
• Bore dimensions reamed consistent to airgauge within .0002 (2/10,000ths) of proper bore dimension.
• We use the best Chromoly steel alloys.
• Two-Pass button rifled
• One-at-a-time barrel making process for superb accuracy

Threaded to fit the Savage Short Action 10, 11, 12, 14, 16 and Long Action 110, 111, 112, 114, 116 series bolt action center fire rifles including the Stevens 200 of identical pattern. Our barrels do NOT fit barrels stamped, "110L" nor WSM and Target actions. For Savage Edge/Axis & Axis II barrel fitting info, please scroll down.

Chromoly steel, blue finish. Be sure to order a chamber that matches your existing bolt face. Or, order our Bolt Face Conversion Service and you'll be able to convert to ANY of our chambers. There are Two Ways to Order Barrels:

Uninstalled Savage Accuracy Barrel Kit - Price includes the barrel plus our free Bore Paste Cleaning Kit with Barrel Break-in Instructions.

*Installation Service is Available - If you'd like us to install your EABCO Accuracy Barrel, please review the

Free Bore Paste Cleaning Kit - Bore Paste assures sufficient cleaning of carbon and copper fouling for the quickest and most trouble free barrel break-in as well as keeping your barrel match accuracy clean. It's the choice of Bench Rest Competitors... Complete Instructions Included.

One-at-a-Time Barrel Making- True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. (The bright metal crown is a Trademark of E. Arthur Brown Company).

Edge/Axis & Axis II Fitting Information - Original Savage "Edge" Rifles were renamed "Axis & Axis II". Receiver barrel threads on Axis & Axis II rifles are the same as EABCO 10/110 Accuracy Barrel threads but they are different rifle models. If you're ordering a barrel for a Savage "Edge" or "Axis & Axis II" rifle, we recommend you send your rifle in and pay the extra $30 for installation plus $65 to re-channel your forend to fit the barrel contour. Again, Edge/Axis & Axis II is a different receiver than the 10/110 series... It will not fit the same stocks as the 10/110 series rifles, for example.

---

E. Arthur Brown Company, Inc
4088 County Road 40 NW, Garfield, MN 56332