EABCO Accuracy Barrel fits Remington 700, 6.5 Creedmoor, 1:8, Blue

Description
Product Features
Customer Reviews
Questions and Answers
Shipping Info

Remington 700 Accuracy Barrel® 6.5 Creedmoor 1:8

Fits Remington 700 Series Rifles with No Modifications*.
Easy Installation and Headspacing with Remage Barrel Nut System (Included).
26" length, Tapered to .800" Muzzle, Varmint/Target weight approx 3lbs.
Bore dimensions reamed consistent to airgauge within .0002" (2/10,000ths) of proper bore dimension.
Two-Pass Button Rifled for Consistent Twist, Bore Diameter, and Surface Burnish.
Contoured, Chambered, and Crowned Center-to-Center for best possible alignment.
We use the best Chromoly steel alloys.
One-at-a-time barrel making process for superb accuracy
*Barrel Channel on Your Stock May need widening.

Upgrading your Remington 700 for Accuracy, Bench Rest, and/or PRS competition begins with installing a better barrel. The EABCO Accuracy Barrel® fits your Remington 700 rifle action with no modifications (Stocks may need barrel channel widened). It's a match grade, direct replacement for your factory Remington barrel and adds precision and versatility with our Remage Barrel Nut system (included). Versatility because you can change barrels yourself. Precision because you can fine-tune the headspace yourself. All with no modification to your original Rem 700 action. The only "difficult" part to our system is removing your original factory barrel from your action. After that, installing and changing barrels is easy with our Remage barrel nut system. So, if you need help the first time, we offer reasonably priced installation services.

Its All About Alignment... Our barrel making process focuses on all aspects of alignment: Alignment of the bore with the contour; of the bore with the crown, of the chamber with the bore; of the throat with the chamber; of the barrel with the action; and so on. The better everything is aligned, the closer each aspect can fit... All to create the most consistent flight of your bullets. Over the years, we have developed techniques and customized our machinery to address all aspects of alignment and the result is out trademark Accuracy Barrel®. Accuracy Barrels are Chromoly steel, blue finish. Be sure to order a chamber that matches your existing bolt face. For example, a 308 bolt fits 6.5 Creedmoor, 6mm Creedmoor, 7-08, 243 Win, etc. There are Two Ways to Order Barrels:

Uninstalled Remington 700 Accuracy Barrel Kit - Price includes the barrel with Remage Barrel nut plus our free Bore Paste Cleaning Kit with Barrel Break-in Instructions. If you need a barrel nut wrench, you can add it at a package discount above. We also have head space gauges if you need them.

Installation Service is Available - If you'd like us to install your EABCO Accuracy Barrel, it's a reasonable $65 for the install plus $65 to inlet your forend (if needed).

Free Bore Paste Cleaning Kit - Bore Paste assures sufficient cleaning of carbon and copper fouling for the quickest and most trouble free barrel break-in as well as keeping your barrel match accuracy clean. It's the choice of Bench Rest Competitors... Complete Instructions Included.

One-at-a-Time Barrel Making- True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. (The bright metal crown is a Trademark of E. Arthur Brown Company).

6.5 Creedmore

Easy install, excellent accuracy

Reviewed by: Martin from In on 1/20/2020

Remage accuracy barrel

I have had great success with previous barrel purchases and I am sure this one will be a great performer also. These barrels are a great value. A lot of performance for the price. Very satisfied with this purchase.

Reviewed by: Bernard Nichols from Huntsville on 1/17/2020

6.5 CRD Savage Barrel Accuracy by EABCO

I swapped my .308 savage fcp barrel with the 6.5 creedmoor. The barrel was very easy to install. I've just about got it broken in. I did modify the break in process. I did the same shot sequence but I only used the boar paste in the first 3 shots then I used butches boar shine and a thicker gun oil for the remainder of the process. I fired 3 rounds through one bullet hole at 100 yards yesterday. If it keeps that up, then I will probably use these barrels for life.

Reviewed by: Impressive from na on 5/24/2019

6.5 Creedmoor Savage Accuracy Barrel

Here are the images of a 4 shot group at 100 yards with your barrel following your break in procedures. Using 123 grain Hornady Amax hand loads. Impressive barrel making guys lol.

Reviewed by: Barry from NA on 10/15/2018

Shooter

Worth every penny. Might not be fancy but it is outshooting my custom curtis rifle build. 1/2 moa avg over about 600 rnds so far... i will have next one threaded when i purchase though.

Reviewed by: Walt from South texas on 9/2/2018

Mr.

6.5 Creedmoor EABCO accuracy barrel installed on my brand new Savage12fv is an excellent combination. Barrel break in load shot .75 groups at 200yds all afternoon. Very pleased!!

Reviewed by: Phil Root from Peoria, AZ on 12/15/2017

fixer & shooter

I have purchased several Savage barrel kits from EABCO and have been very pleased with all of them. Excellent barrel for the price.

Reviewed by: William J Hoffman from Burleson on 9/27/2017

Savage 6.5 Creedmore

This barrel is excellent. I bought one in 6.5 Creedmore and put it on a savage axis reciever. I went out and tested it today, following break in procedure. It was shooting less than a quarter moa at 150 yards with Winchester ammo and a cheap Tasco scope that has been in the family for years, and the original plastic savage stock. I am very impressed with the quality of the barrel and it cannot be beat for the money. Would 100% recommend.

Reviewed by: Evan Holm from New Mexico on 8/16/2017

????????????????????

I received the barrel and it installed with ease. Followed break in in procedure and it has one of the tightest groups that I've used in the past. Good product.

Reviewed by: Lori Harris from Texas on 2/3/2017

Fat and over 50

Totally impressed! This barrel doesn't disappoint!!! Got easily 1/4 groups if I did my part!

Reviewed by: Cliff from Arkansas on 10/16/2016

6.5 Creedmoor

So far i am happy with the barrel shoots prety good

Reviewed by: Joe from na on 10/6/2016

26 Nosler

Fulfillment & delivery excellent . finally got the components together and it shot as to be expected for a quality barrel.

Reviewed by: Jeff Werts from cincinnati,oh on 7/11/2016

Tech

Back in May 2016 I purchased the 6.5 Creedmore barrel. I finally have gotten installed and taking it out and shot it. After following their breaking procedure I am shooting half inch groups at 100 yards with factory hornet 140 Gr ELD match. My only complaint is they did not sell the go no go gauge set for the 6.5 Creedmore. I had to buy it else where.

Reviewed by: Mark from Phoenix on 7/2/2016

Impressive

Reviewed by: erich greer from Dallas, TX on 6/17/2016

Hunter

Very good product, the kit is a great idea. I would like to suggest that EABCO add a new barrel nut to every kit they only cost about $10.00 and I would gladly pay the extra for the convenience. In my opinion the nut should be replaced with every new barrel. The barrel I bought 6.5X284Norma shoots extremely well getting 5 shot groups at 100 yards with all 5 holes touching when shooting my reloads. At 300 yards I am getting 2 inch groups. Thanks EABCO for a great product.

Reviewed by: Arnold from Arizona on 8/2/2015

This is my second barrel from you all and just like the first this is a great shooter. I did the break-in as you suggested and this barrel is shooting .30 in groups with first my first reloads. Keep up the good work and great prices.

Reviewed by: Henry P from KY on 1/7/2015

Q: 5R rifling?

Asked by: Doc - 12/3/2019

A: We use button rifling

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Ahndree (1/6/2020)