Shopping Cart

0 item(s) in cart/ total: $0    view cart
Bench Rest Magazine Follower
Bench Rest Magazine Follower

Bench Rest Magazine Follower

Your Price:$11.00
IN STOCK

Part Number:020-FOLLOWER

Choose Options

Select Benchrest Follower

Visit our Magazine Followers Page for more details.
Single Shot Follower... Why? - For best accuracy potential, bullet seating depth should be dictated by the length of your chamber, not your magazine. Our Benchrest Followers convert your bolt action rifle to single shot with a perfectly shaped loading tray. It aligns each cartridge for straight in, smooth chambering with no limits on bullet seating depth. There's also no gouging, kinking, or denting of your carefully prepared hand loads... Or, deforming of the bullet tip. Installation is Easy - Insert the Benchrest Follower in the magazine box from the bottom so that it will rest on top of the factory follower after closing the floor plate. Rifles with a blind magazine box or without a hinged floor plate require removing the barreled action from the stock... then putting it back together with the Benchrest Follower.

FOLLOWER MODEL APPLICABILITY

Remington 700 Short
,  Fits all Remington 700's, 7's, 722's, 600's,chambered for small case head type cases ,such as 17 Remington, 222 Remington and 223 Remington.
Remington 700 Medium,  Fits all Remington models 7's, 700's, 722's, 600's and 660's chambered for short cartridges with standard case heads, such as the, 22-250, 243 Win, 6mm REM., 7mmx08, 308 Win.
Remington 700 SAUM,  Fits all Remington 700's chambered for the Remington Short Action Ultra Mag line of Cartridges 
Remington 700 Long,  Fits all Remington 700's and 721's chambered for long cartridges with either a standard or magnum case head, such as 25-06, 270 Win, 30-06 Sprg, 7mm Rem. Mag, 300 Win. Mag. , and 375 H&H Mag.
Remington 700 Ultra Mag,  Fits all Remington 700's chambered for the Remington Ultra Mag line of Cartridges 
Ruger 77 Short,   Fits Ruger 77 MK II 's chambered for 223 Remington.
Ruger 77 Medium # 1,  Fits all Ruger 77's and 77 MK II's chambered for the 22-250 Remington.
Ruger 77 Medium # 2,  Fits all regular Ruger 77's chambered for short cartridges with standard case heads such as 220 Swift, 243 Win, 6mm Rem, 7mm X 08 Rem and 308 Win.
Ruger 77 medium # 2 MK II,  Fits all Ruger 77 MK II 's chambered for the short cartridges with standard case heads such as 220 Swift, 243 Win and 308 Win.
Ruger 77 Long,  Fits all Ruger 77 's and 77 MK II 's chambered for the long and magnum cartridges such as 25-06 Rem, 30-06 Rem, 7mm Rem Mag, 338 Win Mag. But not the very large rounds such as the 375 H & H or the 416 Rigby.
Savage Short,  Fits all Savage 10/110 series rifles chambered for the 223 Rem. Long or Short actions
These followers will not A work with the new center feed magazine boxes.
Savage Medium,  Fits all Savage 10/110 series rifles chambered for 22-250 Rem, 243 Win and 308 Win. Long or Short action. These followers will not A work with the new center feed magazine boxes.
Savage Long Fits all Savage 10/110 series rifles chambered for all long cartridges 25-06,270 Win, 30-06, 7mm Rem Mag,300 Win Mag and 338 Win Mag.  These followers will not A work with the new center feed magazine boxes.
Winchester 70 Short,  Fits all post 64 Winchester model 70's chambered for the 222 Rem and the 223 Rem.
Winchester 70 Medium # 1,  Fits all post 64 Winchester model 70's chambered for the 22-250 Rem. and 225 Win.
Winchester 70 Medium # 2,  Fits all post 64 Winchester model 70's chambered for short cartridges with standard case heads such as  243 Win and 308 Win.
Winchester WSSM Fits all post 64 Winchester model 70's chambered for the Winchester Super Short Magnum (WSSM) line of cartridges.
Winchester 70 WSM Fits all post 64 Winchester model 70's chambered for the Winchester Short Magnum (WSM) line of cartridges.
Winchester 70 Long Fits all post 64 Winchester model 70's chambered for long standard or magnum cartridges such as the 25-06, 270 Win, 30-06 Sprg, 7mm Rem Mag, to 375 H & H Mag.
Winchester 70 Long Pre 64, Fits all pre 64 Winchester model 70's chambered for long, standard or magnum cartridges such as 270 Win, 30-06 Sprg, 7 Rem Mag to 375 H&H Mag. It also fits 1903 & 1903A3 Springfields in standard or magnum calibers. Will NOT fit Winchester 70 Classics

5 Stars
savage model 12 22-250 bvss
would not work on my savage mag, . but works great on my mossberg patriot 30.06
Reviewed by:  from Louisville. on 5/1/2018
5/5
4 Stars
Savage follower
Works as expected, very good product and at a very reasonable price. Satisfied with the product.
Reviewed by:  from Lake Forest Estates. on 12/13/2017
4/5
5 Stars
Title?
Follower works great! A common thing on the innerwebs say these are no good for center feed Savages. I took a 6"×.5"×.007 feeler gauge and belt it into a bow-spring into the stocks Maxwell. I cemented the follower on top of the newly formed bow, then assembled. Next time I have the rifle apart, I will drill and tap a small screw to hold the follower and feeler gauge leaf together. Awesome product.
Reviewed by:  from AMARILLO. on 12/10/2017
5/5
5 Stars
None
Very nice product, works as advertised!
Reviewed by:  from Missouri . on 10/6/2017
5/5
5 Stars
LEO
This fit right in my Savage 110 blind mag staggered feed and makes it very easy to feed singles. You'll need to take the action out of the stock to get this in the mag. You'll also want to remove the original ramp that is held to the spring by a screw so the new ramp will set straight in the mag.
Reviewed by:  from Ozarks. on 9/2/2017
5/5
5 Stars
Target Shooting
These precisely machines bench rest magazine followers are great. Just insert them above the follower plate and you can easily load single shot at the range. The cartridges load and unload smoothly. You can remove them at any time for full magazine loading at any time for hunting, etc. Tip: I turn my rifle upside down and open the floor plate to lift out the spring and follower. Then I just drop in the adapter and close every think back up. Takes about 15 seconds.
Reviewed by:  from United States of America. on 8/14/2017
5/5
5 Stars
Great
I purchased two of these for both my 700 SA rifles , the fit & finish is great !!
Reviewed by:  from VT. on 7/31/2017
5/5
5 Stars
Savage 223 short action Model 12
The follower is very well made, very impressed. The follower I ordered is for a savage model 10 and I have a model 12 short action with internal offset magazine - so the follower did not fit out of the package but used some emery cloth to round the front corners a little and after a couple minutes, I had it fitting perfect. it works great, it's nice that I can load one at a time without having to fumble around getting the round into the chamber. Makes F-class night all that more enjoyable!!
Reviewed by:  from MN. on 6/8/2017
5/5
5 Stars
Bench Rest Magazine Follower
The follower is very well made. It's nice that I can load my gun 1 at a time without having to push it down into the mag well.
Reviewed by:  from White Haven. on 5/15/2017
5/5
5 Stars
great fit
I have a mid '70s 40X. This was a simple drop-in and fitted perfectly. Works great!
Reviewed by:  from Tennessee. on 3/4/2017
5/5
5 Stars
outdoor writer
These followers are great! I wish you made one for the center-feed Savage magazines.
Reviewed by:  from Mechanicsburg, PA. on 7/27/2016
5/5
5 Stars
Boss
Well made and works great, Job well done. Ed.
Reviewed by:  from Ca.. on 4/26/2016
5/5
5 Stars
customer
Works like a charm! Drops right in above the mag.follower, no fitting no messing. THANKS
Reviewed by:  from Kansas. on 3/10/2016
5/5
5 Stars
Folllower /308
Great product , a must have item . operation is flawless
Reviewed by:  from East Tx. on 2/19/2016
5/5
5 Stars
Success!
I received my follower in the mail very shortly after I ordered on line. My rifle is a Remington 700, 223 with a Krieger barrel. This particular rifle has always been a little fussy about feeding from the magazine. With the new single shot follower, it works fine every time. Later, I shot the tiniest group I've ever fired with that rifle. Coincidence? I think not! Que the spooky music. Buy one.
Reviewed by:  from Southern Indiana. on 1/16/2016
5/5
5 Stars
Fabulous
Fits and works to perfection !
Reviewed by:  from VA. on 12/19/2015
5/5
5 Stars
M
Works great. This product saved me a lot of money with the gunsmith. Fixed feeding issue in my model 70 CRF in 300 Rum.
Reviewed by:  from NV. on 12/12/2015
5/5
5 Stars
Bench rest follower
Perfect fit. Product is a brilliant idea.
Reviewed by:  from Utah. on 11/28/2015
5/5
5 Stars
Follower
Works and fits perfectly !
Reviewed by:  from Mchenry. on 11/9/2015
5/5
5 Stars
Mr.
Item looks wonderful. Great craftsmanship, rare these days. Went right in with no problems. Works great. Takes a lot of effort out of single round feeding in a bolt.
Reviewed by:  from Alabama. on 8/25/2015
5/5
5 Stars
single shot follower
Excellent fit and finish. Great product.
Reviewed by:  from Crowley Texas. on 5/18/2015
5/5
5 Stars
Competitor
I ordered the follower on a Friday and had it in my hands on Tuesday. The product finish and machine is excellent. Fit was right what it needs to be for my Savage rifle. This one will save me a lot of time in the F-Class matches I shoot. Certainly much easier than fumbling around trying to get the round started up in the chamber. Now I just drop it in, push the bolt closed and go about making X's.
Reviewed by:  from Phoenix. on 4/4/2015
5/5
5 Stars
.223 Single Shot Followr
Quick shipping and it went right in on top of the follower. Works just as advertised.
Reviewed by:  from Lake Havasu City Az.. on 3/30/2015
5/5
5 Stars
Works as intended
This is my second single shot follower. One was for a 243 WSSM Winchester coyote and the current one is sitting in a 6xc that was formerly a 223. It works perfectly for its intended purpose. EA Brown shipped it out very quickly and they have the best shipping rates in the business. They will not overcharge you on shipping.....
Reviewed by:  from Middle TN. on 3/7/2015
5/5
5 Stars
Works perfectly; installs easily.
I received this thing in no time flat and installed it even faster. The follower feeds flawlessly. A piece of advice... make sure that the one you order is designed for your caliber!
Reviewed by:  from Yuba City, CA. on 7/27/2014
5/5

Related Items

Recently Viewed Items