AR-15 HBAR 24" Accuracy Barrel by EABCO - Stainless Fluted Threaded 5.56 NATO/.223 Rem (223 Wylde) National Match

Stainless AR-15 Fluted HBAR Barrel
National Match Grade 5.56 NATO/.223 Rem (Wylde) Accuracy Barrel
Our EABCO Stainless Steel AR-15 Fluted HBAR Barrels are fully chambered and ready to install on an upper receiver. They feature an 11° target crown for enhanced accuracy potential, and they're compatible with BOTH .223 Remington and 5.56 NATO ammunition. The chamber is 223 Remington (Wylde) which is preferred by National Match rifle builders and shooters. These barrels are rifled 1:9 twist which is optimal for light- to medium-weight bullets up to 69 grains. Ready to install with M4 feed ramps barrel extension and locator pin included. Muzzle is threaded 1/2 x 28 for compatibility with muzzle accessories and suppressors.

Technical Information:

• Length: 24"
• Weight: 2lbs 15.8oz
  
• Material: 416R Stainless Steel
• Airgauged: +/- .0002" (2/10,0000ths)
• Contour: Fluted HBAR
• Chamber: 223 Rem (Wylde) for 5.56 NATO/.223 Rem
• Twist Rate: 1 in 9"
• Chrome Lined: No
• Finish: Stainless
• M4 Feed Ramps: Yes
• Muzzle Treatment: Threaded 1/2x28 with 11° Target Crown
• Gas Port Location: Rifle
• Exterior Diameter at Gas Block: 0.750"
  

Should You Install a New Bolt w/This Barrel? Some of our customers have suggested that we should include a new bolt with our AR15 barrels. THEY say you should install a new bolt anytime you install a new barrel on an AR15 platform. On the other hand WE'RE trying to keep costs down and if you already have a good bolt, there's no sense in adding the cost of another one if you don't need it. So, if you want to add a new bolt to your barrel order, you can select "Yes" to add one for an extra charge. Our Nickel Boron bolts are excellent and reasonably priced!