Shopping Cart

0 item(s) in cart/ total: $0    view cart
Satin Stainless Savage Accuracy Barrel® 6mm Creedmoor 1:8
Stainless Savage Accuracy Barrel

Satin Stainless Savage Accuracy Barrel® 6mm Creedmoor 1:8

Your Price:$309.00
IN STOCK

Part Number:127-SV242MS

Choose Options

Optional Installation Services
Barrel Installation (adds $30)
Channel Forend (adds $65)
Included Free:
Savage Barrel Nut Wrench
USP Bore Paste & Gun Oil
Satin Stainless Savage Accuracy Barrel® 6mm Creedmoor 1:8
  We made a special run of Savage 10/110 Accuracy Barrels® in Satin Stainless. These are made to the same spec as the ones we shipped to a special bench rest shooting group: Five guys that shot 4-6" groups at 1000 yds. The head man explained that kind of accuracy as being equivalent to 1/8th inch at 100 yards.
We made these barrels exactly the same except we did them in stainless and finished them in satin glass bead. These are not a regular item and there isn't a large quantity of them. 

  These Accuracy Barrels® for the Savage are precision gun drilled from the best 4140 Stainless Steel. Bore dimensions are reamed consistent to airgauge within .0002 (2/10,000ths) of proper bore dimension. These are then Two-Pass button rifled in the various twist rates we offer to suit particular accuracy requirements. The barrel contour is varmint hunter weight, 26" long and tapering to just under .800" at the muzzle. Threaded to fit the Savage Short Action 10, 11, 12, 14, 16 and Long Action 110, 111, 112, 114, 116 series bolt action center fire rifles including the Stevens 200 of identical pattern. Our barrels do NOT for WSM nor Target actions. For Savage Edge/Axis barrel fitting info, please scroll down.
 
Glass bead Satin Stainless finish. Be sure to order a chamber that matches your existing bolt face. Or, order our Bolt Face Conversion Service and you'll be able to convert to ANY of our chambers. There are Two Ways to Order Barrels:
 
Uninstalled Savage Accuracy Barrel Kit - Price includes the barrel plus our Savage Barrel Wrench plus a Benchrest USP Bore Paste and Cleaning Oil Kit with Barrel Break-in Instructions. If you need head space gauges, see ordering information below.

Installation Service is Available - If you'd like us to install your EABCO Accuracy Barrel, it's a reasonable $30 for the install plus $65 to inlet your forend (if needed).

Free Barrel Nut Wrench ($39 Value) - Fits Savage barrel nuts with rounded as well as squared notches. Small square holes fit standard 1/2" socket end breaker bars.

Free USP Bore Paste Benchrest Cleaning Kit ($10.99 Value) - USP Bore Paste and Cleaning Oil assure sufficient cleaning of carbon and copper fouling for the quickest and most trouble free barrel break-in as well as keeping your barrel match accuracy clean. It's the choice of Bench Rest Competitors... Complete Instructions Included.

One-at-a-Time Barrel Making - True, center-to-center barrel turning at a rate that minimizes stress while keeping the bore in the middle. True, center-to-center chamber reaming insures centering and linear alignment of the chamber with the bore. True, center-to-center 11° target crown, applied after finishing, insures that bullets exit the barrel with perfectly even gas pressure. (The bright metal crown is a Trademark of E. Arthur Brown Company).
 
Edge/Axis Fitting Information - Original Savage "Edge" Rifles were renamed "Axis". Receiver barrel threads on these rifles are sometimes a little too small to fit our close fitting EABCO 10/110 Accuracy Barrel threads. If you're ordering a barrel for a Savage "Edge" or "Axis" rifle, we recommend you send your rifle in and pay the extra $30 for installation plus $35 to re-channel your forend to fit the barrel contour. Also, you should remember Edge/Axis is otherwise a different receiver than the 10/110 series... It will not fit the same stocks as the 10/110 series rifles, for example

Related Items

Recently Viewed Items